Religion . General Education . Telecom skill . Health care

Tuesday, February 25, 2014

Location of Network Planning


1.Indicate where is our scope of work as a Cell Planner and Cell Optimizer.  

2.Network planning work will follow GSM network which progress in cyclic mode
The macro view of GSM network planning is divided into 2 parts – Planning and Optimization.  It is a cyclic action throughout the network expansion.
The micro view of GSM network planning involved the planning work. It involves at the pre-installation phase.
 Steps of GSM Network planning 
The left oval shape depict the work done in the initial planning and site survey.  Data collected in the left oval shape is input into the middle oval shape.  Using the 3-D digital map as the basis, the middle oval provide 5 outputs.
The outputs of the middle oval shape confirm the configurations for our right oval shape’s design. 
Work involved in GSM Network planning
-Planning working contain
Planning working containBTS distributionchannel allocationcell parameter planningIt is important to provide a full design to construct network.  This plan may  differ from the as-built.
1)The location of BTS.
2)The channel distribution.
3)Example of cell parameter planning/BSC Network features --- Cell load sharing, Double BA list and etc …..
Joke : What is meant by “ as built “.
Key points in planning
Provide a good coverage prediction.
Influence of site distribution to network coverage and capacity.
network long-term development and on the  whole  planning.   
Interference from all kinds of sources ( building, Environmental, co-channel, adjacent channel and etc ) has make the nominal cell planning difficult. 
During the engineering design, the above interferences have to be taken into account carefully.
As the network capacity increase, the limited allocated number of frequencies is a challenge for cell planning and cell optimization engineer. 
The network capital investment is an important consideration.